• Follow the steps below to pair your wall switches to the build-in receiver unit (SH4-99751LI05).

Step 1

  • Press and hold the pair button for approx. 3 seconds
  • The LED should start blinking now for the duration of the pairing procedure. 

Step 2

  • While the receiver is in pairing mode, tap the side of the wall switch that has the 'I' symbol on it, to send an ON-signal to the receiver.
  • If pairing is successful, the LED on the receiver should stop blinking
  • Repeat the above steps to pair any other senders to the receiver. The receiver can be paired with 6 different senders.