Android


In the app, press the blue round button with the 3 dashes in the lower right-hand corner and then select the +

Choose the device category.

Choose the device type.

Plug in the receiver, the red light will blink slowly for 10 seconds.

Now within these 10 seconds the LED flashes on pairing in the app.

After this you can test at 3 TRIAL if the device to be paired responds ON and OFF.

If this works, press Next and follow the instructions in the app.

If this does not work, unplug the receiver from the wall outlet for approx. 10 sec and replace it.

Now press re-pair before the receiver stops flashing.


Note: Pair each.


IOS


In the app, press the + in the upper right corner.

Select the device category.

Choose a product.

Plug in the receiver, the red light will blink slowly for 10 seconds.

Now within these 10 seconds the LED flashes pairing in the app.

After this you can test whether the device to be paired responds ON and OFF at 3 TRIALS.

If this works, press Next and follow the instructions in the app.

If this does not work, unplug the receiver from the wall outlet for approx. 10 sec and replace it.

Now press re-pair before the receiver stops flashing.


Note: Pair each.