Tasks do not work, or tasks are not working at the correct times? This means that the Smart Switch is not yet set up correctly. Below an explanation on how to solve this issue.


Location

To enable accurate tasks, your Smarthome Controller needs to know your home location. You can do this by following the instructions below.


Select the Smartphone that you are using.

Instructions for iPhone

  1. Unlock your iPhone and go to 'Settings'.
  2. In Settings, select'Privacy'.
  3. At the top, click  'Location Services'.
  4. Then click on HomeWizard-Lite 'Lite'
    • You are now in the location settings. To ensure the Smart Switch tasks work properly, "While Using the App" must be checked. 
    • After pressing  'While Using the app' click on the Home button on your iPhone to return to the homescreen on your iPhone.
  5. Open the  'HomeWizard Lite'- app
  6. In the bottom left of the main screen press 'Settings'  .
    • Press on a Smart Switch to go into the settings.
    • Press 'Location' to enter Location settings.
      • Press 'Done' to determine the location of the Smart Switch.
        • Pay attention! Do this only when you are at home (You install with your iPhone using the HomeWizard app the location on the Smart Switch)
      • Press "Save" to save the location settings on the Smart Switch.

Instructions for Android

  1. Unlock you Andriod device and go to the 'Settings' menu.
  2. In settings, select 'Location'.
  3. Then, verify that 'my location access' is ON
    • You are now in the location settings. To ensure the SmarthomeController tasks work properly, "While Using the App" must be checked. 
    • After checking 'While Using the app' click on the Home button on your phone to return to homescreen of your device.
  4. Open the  'HomeWizard Lite'- app
  5. Press  'Settings' on the mainscreen
    • Click on a Smarthome controller to go into the settings.
    • Press 'Location' to enter Location settings.
      • Press 'Done' to determine the location of the Smarthome controller.
        • Pay attention! Do this only when you are at home (You install with your iPhone using the HomeWizard app the location on the Smarthome Controller)
      • Press "Save" to save the location settings on the SmarthomeController.



The Tasks will now respond more accurately based on the location you just set.


Creating multiple tasks

If you want to turn on a device but turn it off at a certain time., this can not be accomplished with 1 task. To enable a device, make a task. Then create a new task to turn off a device.